sulphur based
Biodenitrator
S 1501
S 3001
S 4001
for effective nitrate reduction
- ready to use filtration system
- removes nitrates from fresh and  salt water
- great volume without needing lots of space
- optimal efficiency through high internal circulation
and so fast Nitrate removal
- top loading
- detachable tubes
- all tubes fit on the same side
- save Serto tube connections
- no feeding liquid needed in addition
- no seperate pump needed
- long life Eheim high quality pumps
- ultrapure sulphur filling 99,9%


This revolutionary design makes denitrifaction easy and efficienct. Feeding to the bacteria is not necessary just put the unit into your system and let it run for a few weeks, denitrate power will be activated.

The design is based around the 1501 reactor and combine sulphur media with calceous media to offer a serious level of Nitrate removal. The recirculation method is far more efficient than simple single pass pods. As it includes reactor media the pH is fully buffered and enriched with calcium before being returned to the tank.

With the build quality of the 1501 reactor and recirculation these offer very efficient nitrate removal. After a running in time of approximately 3-4 weeks (for the bacteria to colonise the chamber) this unit will, for example, reduce 100 litres with 50mg NO3 to 0 in 3-4 days.

Because this denitrator makes use of the design of Calcium Reactor C1501, once the nitrate problem has been solved, you can easily turn this denitrator into a Calcium Reactor with some additional parts (sold separately).

Comes complete with Eheim 1048 and 1.6kg high grade pure sulphur and broken coral sand.





Modell S 1501
 

detachable inlet / outlet fitting
super save Serto tube connectings
save IP 64 save Eheim pumps

Technical data:

S 1501: height: appr. 400 mm; diameter reactor tube: 110 mm; diameter bottom plate 160 mm; filling up to 1,9 kg; internal flow up to 600 l/h (Eheim 1048); for tanks up to 1.000 liters
S 3001: height: appr. 710 mm; diameter reactor tube: 110 mm; diameter bottom plate 160 mm; filling up to 3,8 kg; internal flow up to 600 l/h (Eheim 1048); for tanks up to 2.000 liters
S 4001: height: appr. 600 mm; diameter reactor tube: 160 mm; diameter bottom plate 190 mm; filling up to 6 kg; internal flow up to 1.200 l/h (Eheim 1250); for tanks up to 4.000 liters
S 10001: height: appr. 1.100 mm; diameter reactor tube: 160 mm; diameter bottom plate 190 mm; filling up to 12 kg; internal flow up to 2.400 l/h (Eheim 1260); for tanks up to 10.000 liters


© KORALLIN